Author: U. Koster, W. Liu, H. Liebertz and M. Michel Institute: Department of Chemical Engineering, University of Dortmund, W-4600 Dortmund 50, Germany The study of mechanical properties of materials is a key aspect in various fields of engineering and materials science. One of the interesting directions in this area is the study of the mechanical […]

Author: M. Yoshimura, A.P. Tsai Institute: Corporate Research Laboratory, Mitsubishi Gas Chemical Company, 22 Wadai, Tsukuba, Ibaraki 300-4247, Japan b National Institute for Materials Science, Tsukuba 305-0047, Japan The application of quasicrystals to a catalyst is one of the most important and promising methods for improving the catalytic activity and selectivity of various catalysts. Quasicrystals […]

Author: Yu.V. Milman, M. O. Efimov, A. A. Golubenko, Wang Changliang, Li Zhang, Zhu Chonggao & Tian Haoliang Institute: Institute for Problems of Materials Science named after. Frantsevich National Academy of Sciences of Ukraine, Kyiv, Ukraine, Key Laboratory of Aviation Science and Technology on Advanced Corrosion and Protection of Aviation Materials, Beijing Institute of Aviation […]

Author: Yudin G.A., Abuzin Yu.A., Tyurina S.A. Institute: MIREA – Russian Technological University, Moscow, Russia; National Research Technological University “MISiS”, Moscow, Russia Quasicrystals are a special type of structure that has amazing physical and chemical properties. They are composed of periodic but non-repeating unit cells, the symmetry of which is forbidden in three-dimensional space. Such […]

Author: Monika Kuster, Zoran Samardzija, Matej Komelj, Miroslav Huskic, Marko Beck, Gaë l Pierson, Richard Kuitat-Njiwa, Jean-Marie Dubois, Saso Sturm Institute: Jozsef Stefan Institute, Department of Nanostructured Materials, Djamova cesta 39, 1000 Ljubljana, Slovenia, Jozsef Stefan International Postgraduate School, Djamova cesta 39, 1000 Ljubljana, Slovenia, Faculty of Polymer Technology, Slovenj Hradec, Ozare 19, 2380 Slovenj […]

Author: B. S. Phillipsa, J. S. Zabinskib Institute: Universal Technology Corp., 1270 North Fairfield Road, Dayton, OH 45432-2600, USA , Air Force Research Laboratories, Materials and Manufacturing Directorate, Nonmetallic Materials Division, Nonstructural Materials Branch, Wright-Patterson AFB, OH 45433-7750, USA Film lubrication using steam and water is one of the least explored areas of technology. However, […]

Author: B. Bendjemil, U. Ramdan and A. Hafs, B. Bendjemil, N. Segeri and S. Habes, D. Vrel, J . Bugdira Institute: LEREC Laboratory, Department of Physics, Faculty of Sciences, Badji-Mokhtar Annaba University, BP 12, Annaba, 23000, Algeria, Faculty of Sciences and Engineering, Faculty of Mechanical Engineering, University of Guelma, BP 401, Guelma, 24000, Algeria, Laboratoire […]

Author: D. J. Sordele, M. J. Kramer, O. Unal Institute: Ames Laboratory, US Department of Energy, Iowa State University, 50011 Ames, Iowa, USA The study of the influence of initial powders on the process of formation of the microstructure of quasicrystalline Al-Cu-Fe coatings by plasma spraying is relevant and significant in our time. Quasicrystals are […]

Author: D. J. Sordele, M. F. Besser and I. E. Anderson Institute: Ames Laboratory, US Department of Energy, Iowa State University, 50011 Ames, Iowa, USA Studying the influence of particle size on the chemical composition and structure of quasicrystalline Al-Cu-Fe coatings is one of the urgent problems in modern science. Quasicrystals are a special type […]

Author: Sergey N. Dub, Yuliy V. Milman, Dina V. Lozko, Anton Nikolaevich Belous Institute: Institute of Superhard Materials, Kyiv, 04074, Ukraine, Institute of Materials Science Problems, Kyiv, 03142, Ukraine The mechanism of plastic deformation of Al-Cu-Fe quasicrystals, studied by the instrumental sharp indentation method, is an active area of ​​research in modern materials science. Quasicrystals […]